How to Allow Local User Accessing Foundry FastIron Edge X448 Web Interface

After you created a unique IP address for your Foundry FastIron Edge X448 switch, you may want to allow local users to access its Web Interface for GUI management. You can follow these simple steps to configure it.

1. At the opening CLI prompt, enter the following enable command:

FESX448> enable

2. Access the configuration level of the CLI by entering the following command:

FESX448# configure terminal
FESX448(config)#

3. Add these two command lines to grant access for local users to Foundry FastIron Edge X448 Web Interface:

FESX448(config)# aaa authentication web-server default local

FESX448(config)# aaa authentication login default local

4. Save the configuration changes to the device's flash memory:

FESX448(config)# write mem